125FX Technical Support
Online Technical Support from Bosch Water Heaters
 
   Accessories

fxhood.gifFXHOOD 
The FXHOOD is a horizontal vent terminator with built-in freeze protection for AquaStar 125FX model.

It is required when installing the AquaStar 125FX model. See FX Hood dimensions & Vent terminal clearance (below).

*Note: The FX Hood is included with the purchase of an AquaStar 125FX.

   

FXHOOD rough cut opening is 10 1/8" x 10 1/8"

fxhood_dimensions.gif

  • The approved vent terminal must be installed so that flue gases will not jeopardize people, overheat combustible structures or enter into buildings, and so that proper clearances are maintained.
  • The vent terminal shall not be less than 7 feet above a public walkway.
  • The vent terminal shall terminate at least 3 feet above any (mechanical) air inlet within 10 feet.
  • The vent terminal shall not be within a 6-foot radius from a gas meter or regulator.
  • The vent terminal shall be a minimum of 6 feet from any combustion air inlet.
  • The vent terminal shall terminate from an opening window, at least 4 feet below or 4 feet horizontally from the opening.
  • The vent terminal shall terminate from a door, at least 1 foot above and 4 feet horizontally from the door.
  • The vent terminal shall not be less than 3 feet from an adjacent building.
  • The vent terminal shall not be less than 1 foot above grade.

fxhood_clearance.gif
   
125FX Tech Support
aquastar 125fx
 

Note: Specifications and product information subject to change without notice.